[Leaplist] an ipcop question

[Phil Barnett]

On Thursday 11 December 2008 21:31:52 Hank Lambert wrote:
> I thought that is how the orange would work, being the DMZ, but I
> wasn't sure. As far as the wireless, I have a router, a WRT54G that I
> am flashing with Tomato firmware. Being it is a "ritter", I'm not sure
> that putting it on the blue interface would really matter.

Yes, it will work fine.

1. Turn off DHCP in the Ritter.
2. Give the unit (the switch side) a fixed IP address on the same subnet that 
the Blue DHCP is configured for.
3. Don't plug the blue network card into the WAN port, plug it into one of the 
switch ports.

If you ignore the WAN port, they act like an access point with a 4 port switch 
attached.

-- 
"Ninety percent of politicians give the other 10 percent a bad name." -- Henry 
Kissinger


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.leap-cf.org/pipermail/leaplist/attachments/20081215/debe0f24/attachment.html