FW: [Leaplist] IBM PowerServer 340

[Tony Lay]

Brad,

Don't know if this is the right model (6Ry)

ftp://ftp.software.ibm.com/systems/support/system_x_pdf/19k6113.pdf
Page 115

google for "340-<<model number>>" diagnostic error codes and look for the
corresponding hardware manual.  IBM has good legacy support, your manual is
probably out there.

Regards,

-Tony

On 4/18/07, brad nagel <brad.nagel at realeasysoftware.com> wrote:
>
>  *Apologies in advance for second sending but I just joined the list and
> don't know if first one went through or not*
>
>
>
> Does anyone know where I can locate the following?
>
>
>
> A hardware reference guide for an IBM PowerServer 340 that has reference's
> for the HEX codes on the front display.  Specifically I have a unit that
> powers up for about three seconds displays a 120, then a 124 and powers
> right back down.
>
>
>
> Does anyone have a IBM Powerserver 340 they want to get rid of?
>
>
>
> Excuse me in advance if I make any terminology mistakes as I'm a bit rusty
> on the legacy IBM world.
>
>
>
> Regards,
>
>
>
> Brad Nagel
>
> sdr LLC
>
> 2800 Aurora Rd Suite J
>
> Melbourne, FL 32935
>
> Cell:       321-795-0787
>
> Fax:       321-574-0410
>
> Toll free: 866-861-4187
>
> brad.nagel at RealEasySoftware.com
>
> www.RealEasySoftware.com
>
>
>
> _______________________________________________
> Leaplist mailing list
> Leaplist at leap-cf.org
> http://lists.leap-cf.org/mailman/listinfo/leaplist
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.leap-cf.org/pipermail/leaplist/attachments/20070418/dac72a03/attachment.html